The requirements for a E.W.T Rear Tipping Dumper are as follows:

• 25 Questions in a controlled environment with no disturbances.

• Complete all pre-start and running checks.

• Reverse in a straight line (50M) through a restriction (loaded and unloaded).

• Manoeuvre through a chicane forwards and reverse (loaded and unloaded)

• Travel over varying terrain.

• Travel up and down a gradient.

- Stop and start on the gradient while travelling uphill

- Stop and start on the gradient while travelling downhill

• Receive 4 loads then:

- Discharge over an edge or into an excavation twice (Stop blocks or bund must be in place)

- Discharge twice to form a stock pile.

• Shut down procedures

• The full test must be completed within 1hr 30mins.

 

Additional info:

The operators manual must be accessible. The dumper must be fitted with R.O.P.S and F.O.P.S. A machine with loading capabilities will also be needed for loading the Dumper, a 360 excavator is recommended. All equipment must meet P.U.W.E.R regulations.